Toro Precision Blue 3.20m Fixed Spray Nozzle | Fixed Arc 60˚-90˚-120˚-150˚-180˚-210˚-240˚-270˚-360˚

Toro Precision Blue 3.20m Fixed Spray Nozzle

► For Large Quantities Get Quotes

Toro Precision Blue 3.20m Fixed Spray Nozzle | Fixed Arc 60˚-90˚-120˚-150˚-180˚-210˚-240˚-270˚-360˚. The TORO Precision Fixed Spray Nozzles perhaps are the best in their class, incorporating technological innovations that bring, among other things, an undeniable reduction of the amounts of irrigation water by about 1/3. Their use makes the installation of an automatic or/non irrigation system extremely easy, economical and efficient, using fewer valves than usual. With a typical wetting radius of 1.4 to 4.6 m and easy application, they contribute so that the full coverage of the irrigation needs of each individual garden is ensured. Having the possibility of placing 60˚, 90˚, 120˚, 150˚, 180˚, 210˚, 240˚, 270˚ and 360˚ wetting arcs, the Toro Precision Blue 3.20m Fixed Spray Nozzle can be adjusted in an extremely flexible way, finally bringing the watering coverage of almost any corresponding requirements of garden and landscape irrigation area.

 

► Suitable and for Fixed Spray Pop-up Sprinklers 570Ζ 

► All TORO products are fully supported with original spare parts (Guarantee of the Official Greek Dealer)

General Characteristics of Toro Precision Spray Nozzles

 

Patented H²0 Chip Technology

Using patented H²0 Chip technology – and with no moving parts – each Precision Series water spray nozzle creates one or more high-frequency oscillating water streams (200 cycles per second - cps) to achieve the desired arc and wetting radius with approximately 1 /3 less water consumption.

 

 

 

 

 

 

 

Operation & Efficiency of H²0 Chip Technology

The water enters a specially designed chamber within the H²0 Chip section where it is processed in such a way as to create an oscillation effect. At the exit, constant-sized water droplets are formed that follow the designed pattern and arc radius, having precise boundaries and optimal distribution uniformity.

 

 

 

 

 

 

Design and Retrofit Effectiveness

The lower flow rate of Precision™ Series Spray Nozzles maximizes design efficiency and saves on overall material costs by using fewer valves and less controller stations. In addition, the performance of existing systems with lower pressures can be upgraded with a simple retrofit of the pre-existing high flow nozzles.

 

 

 

 

 

 

Third Party Performance Validation

Precision Series water spray nozzles have been tested and validated through laboratory and independent field testing and at California State University's Center for Irrigation Technology (CIT). There it was proven that their performance is 15-20% higher than similar nozzles on the market up to 4.50 meters of wetting radius.

 

 

 

 

 

 

Optional Pressure Compensating Device (PCD)

Precision Series Spray Nozzles with Pressure Compensation maintain a 1” per hour precipitation rate and minimizes misting and atomizing when system pressure exceeds 40 psi. Integrated pressure compensation can minimize the need for a regulating head at a fraction of the cost.

Toro Precision Blue 3.20m Fixed Spray Nozzle

Presentation

The Toro Precision Blue 3.20m Fixed Spray Nozzle is designed to quickly and easily deliver excellent irrigation performance with maximum flexibility and water conservation. Includes all pre-set arc wetting cycle nozzles in its Series, delivers water to a typical radius of 3.2m, adjustment screw allows radius length to be reduced by up to 25%, while keeping the same uniform watering rate. The Toro Precision Blue 3.20m Fixed Spray Nozzle is available with its special filter. The nozzle trajectory for all models in the Series is 15˚.

Toro Precision Blue 3.20m Fixed Spray Nozzle

Technical Data

MANUAL

TORO Precision Charts

Company & Products of TORO

 

Write a review