KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours - Respirator Mask Filters

  1. Home
  2. Products
  3. Personal Protective Equipment
  4. Respiratory Protection - Masks
  5. KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours
KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours - Respirator Mask Filters
Views: 2742 Brand: Kasco Srl
Product Code: 1410601070
Availability: 4-10 Days
32,50€
Qty: Add to Cart

 

KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours

 

Respiratory Protection

KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours - Respirator Mask Filters. Filter for protection against gases and organic vapours – class A1P3. The Replacement Mask Filter ZA1P3 has large diameter, 110mm, for lower respiratory resistance at same efficiency and height 68 mm. Its weight is 230 gr.

 

Filters cannot be washed, blown out or restored. When exhausted they must be discarded. If sealed, the filters remain integral until the date of expiry. 
A filter which has been opened must be replaced when at least one of the following conditions occurs: 50 hours of actual use or when the small of gas or other contaminant is detected inside the facepiece.

 

Kasco-Srl-Λογότυπος

Product Offered

 1 filter

 

 

 

General Information

 

The KASCO ZA1P3 Replacement Activated Carbon Filter:

  • Protects the worker from gases and organic vapours

  • It achieves the maximum level of safety for the user and the worker

  • It ensures less fatigue during use because it allows more oxygen inflow

  • Used for respiratory protection when spraying insecticides, fungicides and herbicides

 

KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours

 

User Guide for the Replacement Activated Carbon Filter KASCO ZA1P3

User Guide for the Replacement Activated Carbon Filter ZA1P3

 


 

 

Replacement Filter ZA1P3 in Mask Kasco Venus 1 - In Action

 

 

 


 

Personal Protective Equipment
Category Filters for Protection Masks
Type Filters for Reusable Full Face Mask
Product KASCO ZA1P3 Filter For Particles, Solid & Liquid Aerosols, Gases & Organic Vapours
Material 1. Filter housing: Polypropylene, 2. Filter cartridge: Technical paper, 3. Glue: Polyurethane, 4. Activated carbon: Type A2
Certification - Standards Conforms to REGULATION (EU) 2016/425, ΕΝ12942
Application - Use KASCO ZA1P3 Filter for Gases & Organic Vapours are suitable for the Reusable Face Masks K50 Silicon, VENUS 1.
Brand Kasco Srl
Origin Italy
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Captcha



Tags: Reusable Full Face Protection Masks, Kasco Filters